Lapp ÖLFLEX® CLASSIC 110 CY - CY Cable - Number Coded Cores1135003
Lapp Olflex Classic 110 CY cable is a flexible copper braided PVC connecting and control cable. Its make up consists of an inner PVC sheath wrapped with copper braiding and finally a transparent outer sheath. The inner cores of Lapp Olflex 110 CY control cable are black with white numbers on each coded labelled with white numbers (repeated along the cores).
CY cables give the user the advantage of protection from electrical interference which could lower the quality of a signal being transmitted by having a tinned copped wire braid and a Polyethylene Terephthalate (PET) separator around the cable forming part outer sheath. This combination protects the CY Control cable from electrical interference while also assisting with mechanical stress. It can be used in both wet and dry conditions and is resistant to various hazardous and corrosive substances including environments where acids and oils are prevalent.
Finely stranded bare copper wires.
PVC core insulation LAPP P8/1 Cores twisted in layers.
PVC inner sheath,
Grey Tin-plated copper braiding.
PVC sheat- transparent
|Core identification code:||White numbers on black cores|
|Classification:||ETIM 5.0 Class-ID: EC001578 ETIM 5.0|
|Conductor design:||Fine wire according to VDE 0295, class 5 / IEC 60228 class 5|
|Minimum bending radius:||
Occasional flexing: 20 x outer diameter.
Fixed installation: 6 x outer.
Occasional flexing: -5°C to +70°C.
Fixed installation: -40°C to +80°C